Reasons For Thread Breaking In Sewing Machine

Hello friends, welcome to another new interesting topic where we are going to talk about reasons for thread breaking in sewing machine by the way, when the sewing machine is new, it does its job well.

There can be other reasons as well as leaving the thread of the sewing machine, not using the sewing machine for a long time, there are many other reasons for the dust particles inside the sewing machine, which are known about.

How to prevent sewing machine damage

 Not using the sewing machine for a long time can be a big reason, due to which the sewing machine starts running heavy, here are some ways in which you can operate it smoothly.

 Make sure that there is a fine nozzle in the funnel of the oil pourer. For pouring oil in the sewing machine, pour oil in those holes so that the oil falls inside the machine itself.

It is very wise to always use the best quality oil in the sewing machine so that the sewing machine does not jam. And the machine runs well.

Machine wheel jams occur due to high bearings and sometimes thread getting stuck in the shuttle.

While using the sewing machine, keep in mind that the needle of the machine is properly engaged, if the needle is not fitted properly, sometimes the sewing does not come right, it pulls the thread of the cloth as well as the needle breaks. The fear remains.

Keeping in mind the type and quality of the fabric, different numbers of needles should be used. Using the same type of needle in all types of fabrics can sometimes break the needle. Always use the best quality thread from a good company. Use it.

We should keep in mind that even after filling more thread in the chakri, sometimes the thread breaks again and again, due to which good sewing does not come.

If the thread gets stuck in the shuttle of the sewing machine, the machine is not able to run properly, then lift the shuttle from the upper side of the machine and take out the wheel

 And while rotating the back wheel of the machine back and forth, remove the thread from the shuttle with tweezers. Shuttle is the part of the machine where the chakri filled with thread is fitted.

The scroll type which is installed under the pressure foot in the machine should be kept clean with a soft brush. So that the dust does not settle there, after sewing, keeping a small piece of cloth there, the legs should be lowered.

  After using the machine, it should be kept covered with a cloth or cover so that the dust particles do not go into it. Get your sewing machine serviced every 4-5 months. On the other hand, the reason why the sewing machine breaks the thread repeatedly

Checking the needle of the sewing machine from time to time

Take out the needle of the sewing machine and stretch your hand in front of it to see if the needle is not lathe in front. Apart from this, you remove that needle by putting it inside the cloth.

And see if it is removing easily or not? If he is having trouble getting out early, you can try changing the needle once.

Check by removing the needle of the machine

By continuing to use an old needle, that thread starts breaking. Apart from this, due to the frequent breaking of the thread of the sewing machine, there can also be a crooked needle. Friends, you can check the needle manually. If the needle is a teddy, you can change it.

Thread check

Strong, strong, and economical threads should always be used in the sewing machine if we suddenly use raw thread in the machine.

Thread can break due to tension, if the good quality thread is also breaking in the machine, then there is probably some other problem.

Adjusting the tension on the thread

As we all know that the thread on the needle comes from inside a tensioner, with the help of which we can adjust the tension on the thread.

We can adjust the tension by twisting it, first we will see by loosening the thread, even after that, if the thread is breaking in the stitch, then by increasing the tension on the thread, we can adjust it. After that you have to check.

 Whether the sewing machine is breaking the thread or not? Even after that, if the sewing machine continues to break the thread, you'll need to go to the next step.

Check bobbin

There is a bobbin in the lower part of the sewing machine, in the lower part of the sewing machine there is a bobbin inside which we wrap the thread, from inside the sewing machine we will see that bobbin and the chalk inside it will come out

 That the thread which is stuffed/wrapped inside it is not too loose. If the thread is getting loose then this can also be a reason for the thread breaking. In such a situation, we have to remove all the thread from the wheel and wrap it again properly.

 This time we have to take full care that the thread is wrapped properly and it should not be loose from anywhere, after that after fitting the chakri in the bobbin, we should check the bobbin again whether the thread is breaking now or not.

Trash getting stuck due to breaking of sewing machine thread

If the sewing machine is kept closed for several days, dust particles would come in it, in such a situation, if the sewing machine is being used, then there is a high possibility of breaking the thread.

 To clean this dust / garbage from the parts of the sewing machine, clean it thoroughly with a soft cloth or burush, even after that if the machine is breaking the thread, then you can use another method for it.

Not threading the bobbin properly

Sometimes we forget to apply the thread properly, due to which the sewing machine starts breaking the thread, for this, once check the bottom that whether the thread is properly placed inside the bobbin or not, there are two holes in the bobbin. The thread is removed, if the thread is not attached properly, then we should put it in the right way.

Summary

I hope you like this post why our sewing machine thread breaks again and again - you must have liked the reason, if you liked this post, then definitely write, share, comment if you have any questions, do comment us.